How To Use Your BeautyPro 2.0 🪄

Below you will find:

A video tutorial on how to use and care for your wand
Step-by-step instructions for pre, during, and post-use
Breakdown of attachments including what each head is used for and how to use them

Read this whole guide and watch video before using your wand to ensure you are using it in the safest and most effective way possible.

📌 Step-By-Step Guide

⚠️ Safety Precautions

Before using your wand, keep these important safety tips in mind:

Always use on clean, dry skin or scalp.
Remove all metal jewelry before treatment
Do not use on broken skin or open wounds.
Do not use if you are pregnant, have a pacemaker, or any other electronic medical implant.

🔑 Tips For First Time Users

When first starting high-frequency treatments, start on the lowest power settings(1-2 ticks).
Only use for 10-20 seconds max per treatment area, zapping in 3-5 second intervals to avoid over-irritation.
Less is more - only use for 2-3 minutes on skin and 3-5 minutes on hair max, every other day, for your first few treatments.
You should only feel a tingling sensation when using, if the zaps are painful, you're on too high of a setting.
Don't over do it - high-frequency therapy is powerful and it only takes a couple minutes of treatment, every other day to see results.

✨ Using Your Device✨

Step 1: Before Use

Cleanse your skin (or scalp) with a gentle cleanser and pat it completely dry.
Ensure your hands are completely dry before handling the wand.

Step 2: Turning On Wand

Make sure dial is turned completely to off(will hear clicking sound) and plug wand directly into wall
Choose head to use, read guide below this section to learn how to use each head & which head to use for your specific skin concern
Insert the selected head(metal portion down) securely into the wand, pushing from base of attachment to avoid accidental breakage
Turn dial on base of wand, you will hear a buzzing sound to indicate its on. If it's your first time do not increase past the 2nd tick mark

Step 3: Treatment

Place your finger on the glass head about 2 inches from the base.
Hover wand 0.5-1 inch above target area, leaving space for current to flow
Release your finger at base of the head to start the flow of high-frequency current and glide wand around treatment area
After 3-5 seconds, place finger back on base of the base of the glass head to stop the flow
Repeat 3-4 times per treatment area

Step 4: After Care

Face + Neck: Apply a hydrating moisturizer (preferably water-based with hyaluronic acid). This is essential to avoid over-irritation.
Hair: Massage in a lightweight scalp serum or essential oils.
Wait 15 minutes after use to apply any potential irritating creams, like retinols.
Do not perform micro-needling on the same days you use your wand
Clean the electrode with a dry cloth or alcohol wipe after each use.

Recommended Treatment Duration

If it is your first-time using, use the lower recommended time:

Acne Treatment: 2-5 minutes
Anti-Aging & Wrinkle Reduction: 3-5 minutes
Hair Growth & Scalp Circulation: 3-7 minutes
Use 3-4 times per week for best results.

Different Attachments & How To Use Them

lightbulb

Mushroom Tube(Acne, Acne Scars, & Anti-Aging)

What It Treats: Large areas like cheeks, forehead, and jawline.

How to Use: Glide in slow, circular motions for 10-20 seconds at a time across the face and neck to kill acne-causing bacteria, stimulate collagen, and reduce fine lines + wrinkles.

lightbulb

Spot Tube(Acne)

What It Treats: Individual pimples, cystic acne, and blemishes.

How to Use: Hold directly over the pimple for 3-5 seconds at a time and max 20 seconds per pimple before moving to the next area. Best for targeting stubborn breakouts.

lightbulb

Comb Tube(Hair)

What It Treats: Hair growth, scalp circulation, and dandruff.

How to Use: Slowly Glide down the length of your hair, starting at the scalp and making sure the teeth of the tube touch your skin. This boosts circulation, stimulates dormant hair follicles, and boosts new hair growth.

lightbulb

Neck Shaped Tube(Anti-Aging)

What It Treats: Jawline, neck, and décolletage (chest area).

How to Use: Sweep along the contours of your jawline and neck, 10 -20 seconds at a time, for firming and sculpting effects. Helps with lymphatic drainage and reducing sagging skin.

lightbulb

Tongue Tube(Under Eye & Anti-Aging)

What It Treats: Under-eye area, fine lines, and crow’s feet.

How to Use: Lightly tap under the eyes and glide along fine lines to improve circulation and encourage collagen production. Use on the lowest setting for delicate areas like the under-eye.

lightbulb

Rod Tube(Scars & Stretch Marks)

What It Treats: Large areas of the body, like the arms, legs, and torso.

How to Use: Glide across the skin in slow motions over large areas like the arms, legs, or back to help reduce the appearance of scars and stretch marks by promoting skin cell regeneration and collagen production.

Troubleshooting and FAQs

Common Issues and Solutions

Painful Sensation: Lower the intensity of the wand. A mild tingling is normal, but burning or pain indicates the setting is too high.

Uneven Results: Consistency is key. Ensure you follow the recommended frequency and duration for best results.

FAQs

Can I use the wand on sensitive skin? Yes, but start with the lowest intensity and gradually increase as tolerated.

How soon will I see results? Results vary by individual. Typically, noticeable improvements can be seen after several weeks of consistent use.

Is the smell normal? Yes, it is. The smell comes from the oxidation of the gas in the electrode, which is part of the process of creating the frequency you see. This is not your skin burning and is completely normal and safe. Rest assured, it’s a natural part of the high-frequency treatment.

Want to unlock up to 70% better results?

Pair your BeautyPro 2.0 with our LuminaLux Rejuvenate 4 Color LED Mask. Clinically proven to provide up to 70% better acne fighting results when used together!

Use code RADIANT50 for $50 off our award-winning LED Mask!